Print Page - Damaged polymer window

Title: Damaged polymer window
Post by: Farqhuit on June 25, 2019, 03:32:12 AM

Hi all,

I've damaged the polymer window on our Oxford EDS detector head. It disintegrated with an inrush of air. What level of vacuum is required in these units, and how would it be pumped down after repair? Or is the new window fitted under vacuum? Any advice welcome, thanks.

Dave

Title: Re: Damaged polymer window
Post by: Jacob on June 25, 2019, 10:20:33 PM

Hi Dave,

Is this an SDD or a SiLi detector with a dewar?

-Jacob

Probe Software Users Forum

General EPMA => EPMA Equipment and Parts => Topic started by: Farqhuit on June 25, 2019, 03:32:12 AM