Text only | Text with Images

Probe Software Users Forum

Hardware => Thermo => Topic started by: Probeman on September 24, 2019, 01:54:49 PM

Title: Feature Requests in Pathfinder
Post by: Probeman on September 24, 2019, 01:54:49 PM
Maybe this feature already exists in Pathfinder, so please someone let me know if it does. But if not I think it would be useful to be able to double-click on an image to move to that stage position.  Also for single spectra to move to where it was acquired.
Title: Re: Feature Requests in Pathfinder
Post by: SteveSeddio on September 30, 2019, 08:37:08 AM
Hi Probeman,

For electron images in Point ID, SI, or Linescan modes,
-Single click on the electron image
-Choose Image -> Return to stage position

I would like this added for Spectrum mode too...
-Steve
Title: Re: Feature Requests in Pathfinder
Post by: Anette von der Handt on September 30, 2019, 03:38:19 PM
Wait, my Pathfinder allows to return to stage position in spectrum mode already :)
Title: Re: Feature Requests in Pathfinder
Post by: SteveSeddio on October 01, 2019, 11:08:15 AM
Ha!
Eventually, I will learn how to use my software.
Spectrum -> Return to Stage Position.

Thanks, Anette!
Text only | Text with Images