Text only | Text with Images

Probe Software Users Forum

Software => CalcZAF and Standard => Topic started by: remidelville on August 20, 2014, 05:32:18 AM

Title: Comparison ZAF correction values given by CalcZAF and CAMECA SX100 software
Post by: remidelville on August 20, 2014, 05:32:18 AM
Hello,

I am trying to compare the Z,A,F coefficients given as output in the SX100 software provided by CAMECA and from CalcZAF. CAMECA is using the model developed by Dr POUCHOU and PICHOIR. I ran a test case for one of our sample but got quite different results from both programs. I would expect to obtain the concentration of one element by multiplying k-ratio (Ix/Ipure) time ZAFCOR. It works for CalcZAF but strangely not in the CAMECA software. This is a question I mayask CAMECA directly as it concerns their software but I wonder if anybody went through this exercise already.

Thanks

Rémi Delville
Title: Re: Comparison ZAF correction values given by CalcZAF and CAMECA SX100 software
Post by: Mike Jercinovic on August 20, 2014, 02:57:19 PM
This must be something to do with significant figures not carried through properly in PeakSight.  The calculation of Ix/Ipure * CF is always a little off of the reported wt. fraction in the full output of PeakSight 5.  If I go back to our old PeakSight 4 output the calculation of k-ratio * correction factor does give the correct wt. fraction.  It would be worth a quick query to Michel Outrequin.
Text only | Text with Images