Print Page - Read image shift values on JEOL 8x30

Title: Read image shift values on JEOL 8x30
Post by: glennpoirier on November 08, 2016, 12:07:10 PM

Hi All,
Does anyone know how to get the numerical values of image shift (as opposed to beam shift) on an 8x30?
I can set them to min-max in the FT menu, but I can't find a place to get the numerical values.

Thanks

Glenn

Title: Re: Read image shift values on JEOL 8x30
Post by: Probeman on November 08, 2016, 03:33:44 PM

Quote from: glennpoirier on November 08, 2016, 12:07:10 PM
Does anyone know how to get the numerical values of image shift (as opposed to beam shift) on an 8x30?
I can set them to min-max in the FT menu, but I can't find a place to get the numerical values.

I wonder if the JEOL software displays beam shift for both the image shift (scan on) and beam shift (scan off)?
john

Title: Re: Read image shift values on JEOL 8x30
Post by: Probeman on November 16, 2016, 08:10:47 PM

I don't know where the JEOL software displays the image shift values or the beam shift values, but I have discovered that both image shift and beam shift are present as two separate parameters in the low level instrument interface.
john

Probe Software Users Forum

Hardware => JEOL => Topic started by: glennpoirier on November 08, 2016, 12:07:10 PM