News:

:) All Electron Probe Micro-Analysts are welcome to register and post!

Main Menu

Proper PHA tuning for high accuracy quantitative analysis

Started by Probeman, June 14, 2026, 10:46:17 AM

Previous topic - Next topic

Probeman

I've been asking a few people if they would be willing to try and reproduce these quant results using SiO2/MgO and Fe3O4 oxides as primary standards and the NIST K-411/412 mineral glasses as secondary standards.

A few labs have these K-411/412 materials handy, but some labs do not, so we are trying to think of some other materials that could be tested.

Of course if one has the FIGMAS MgO/Al2O3/MgAl2O4 mount from Will Nachlas, that would work also. Another alternative is the USGS BIR-1G basaltic glass. I don't think it's quite as well characterized as the NIST glasses, but here are some measurements I did along with the NIST glasses, again using SiO2/MgO and Fe3O4 as primary standards:



~1.5% relative accuracy for Si Ka, Mg ka and Fe Ka.  So this material may be worth trying with this new PHA tuning method if you have it...
The only stupid question is the one not asked!