News:

:) We are a community of analysts, that cares about EPMA

Main Menu

Beam Scan Calibration for NSS Mosaic Operations

Started by John Donovan, March 07, 2014, 04:38:41 PM

Previous topic - Next topic

John Donovan

Here is a short document from Thermo on adjusting the X and Y beam scan calibration for their "montage" feature.
John J. Donovan, Pres. 
(541) 343-3400

"Not Absolutely Certain, Yet Reliable"

Probeman

#1
Quote from: John Donovan on March 07, 2014, 04:38:41 PM
Here is a short document from Thermo on adjusting the X and Y beam scan calibration for their "montage" feature.

Note that there is now an even easier way to calibrate the beam scan in NSS.  Simply acquire a BSE or SE image and note the magnification. Then utilize that images, along with a stage scan image of the same area acquired with Probe Image, in the CalcImage Processing | Calibrate Beam Scan menu window as described here:

http://smf.probesoftware.com/index.php?topic=396.0
The only stupid question is the one not asked!